trendnet usb to ethernet driver raspberry pi

No powered USB hub needed, tested on Raspberry Pi A+ Doing OK using Apple USB charger and Pi's own USB port. Works out of the box (driver present since kernel 2.6.32). Apple USB Ethernet Adapter using asix kernel driver.If you get a model without the Logilink logo and the model number JP1082 it's a fake. This only supports USB1.1 and isn't well support under Linux. Lsusb output: Bus 001 Device 004: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapterīE CAREFUL: There exists a chinese copied version without the Logilink-Logo using the Kontron DM9601-chip (see 'Problem Ethernet adapters' below). LogiLink Fast EN USB 2.0 to RJ45 Adapter: Test on Wheezy-Raspian () without USB Hub will be confirmed.Does not work without powered USB hub.USB 2.0 UA0144: AX88772 chipset using the asix kernel driver.USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver.For Raspbian 3.9.+ the driver is already included in distribution. Easy to follow instructions on how to download the kernel source code and symbol files can be found in the 2nd posting here, including how to compile the module. NOTE: Until Raspbian 3.8.y kernel did not include a driver for this hardware, you must have to build a new kernel module from the source code provided by ASIX here. USB 3.0 to Gigabit Ethernet Adapter (ASIX AX88179) USB Ethernet Adapter.

USB 2.0 to Fast Ethernet Adapter (ASIX AX88772B) USB Ethernet Adapter: As distributed with Zenbook Ultrabooks.

FRITZ!Box WLAN 3030 USB Ethernet Adapter: Works out of the box.

ADM8511 Pegasus II Ethernet, full-speed, idVendor=07a6, idProduct=8511: Works out of the box.

Trendnet usb to ethernet driver raspberry pi